PLC Xinje XC3-14 Series: 8 DI/6 DO, 8 relay outputs (R) or transistor outputs transistor mixed output (RT)(T)AC220 or DC24V power supply
Support power-off retentive Support basic logic control and data operation Support high speed count, pulse output, external interruption, C language function block, free switch for I/O points, free protocol communication and MODBUS communication.
Can not support expansion module and BD board.
General Specifications
Item |
Specification
|
Insulation Voltage
|
Above DC 500V 2MΩ
|
Noise Resistance
|
1000V 1uS pulse for 1 minute
|
Environment Temperature
|
0℃~60℃
|
Ambient Humidity
|
5%~95%
|
COM 1
|
RS-232, be connected to host machine or HMI for programming or debugging
|
COM 2
|
RS-485 or RS-232,network or connect to intelligent instrument, inverter, etc.
|
Installation
|
M3 screw fixed or DIN46277 (35mm width) guide rail installation
|
Grounding
|
The third type grounding (Never perform common grounding with strong power system)
|
Functional Specifications
Item
|
Specification
|
Program Operation Mode
|
Circulation scanning mode, timing scanning mode
|
Program Mode
|
Instructions and ladder chart
|
Dispose Speed
|
0.5us
|
Power Failure Holding
|
FlashROM
|
User Program’s Capacity
|
2500 steps
|
I/O Points
|
8 input points,6 output points
|
Output Format
|
Relay
|
Power Supply
|
AC220V
|
Interior Coil’s Points (M)
|
8512 points
|
Timer(T)
|
Points
|
620 points
|
Specification
|
100mS timer:set time 0.1~3276.7 seconds
10mS timer:set time 0.01~327.67 seconds
1mS timer:set time 0.001~32.767 seconds
|
Counter(C)
|
Points
|
635 Points
|
Specification
|
16 bits counter::Set value K0~32767
32 bits counter:Set value K0~2147483647
|
Data Register(D)
|
8512 characters
|
FlashROM Register(FD)
|
2048 characters
|
High-speed Count Format
|
High speed counter, pulse output, exterior interruption
|
Timing Scanning Interval Setting
|
-
|
Password Protection
|
6 characters ASCII
|
Self-diagnose Function
|
Power on self-diagnose, monitor timer, grammar check
|
Dimension (Unit: mm)
|